Features of ZN-SPL04Y Outdoor Mini Pan Tilt Unit with Top Payload to 4kg (8.82Ib)
Light pan tilt unit, indoor/outdoor use
High-precision Worm Gear Transmission
Support Power-off Self-locking
Max.Load Capacity 4kg(8.82lb)
High-Strength Aluminum Alloy Construction
Pan Speed: 0.01°~20°/S (Up to 30°/S~55°/S; the higher the rotation speed, the lower the payload capacity )
Tilt Speed: 0.01°~10°/S (Up to 15°/S~30°/S; the higher the rotation speed, the lower the payload capacity)
360° continuous(Customizable rotation range from 0° to 320°)
Tilt Range: -60°~20°(Optional limited rotation, with a maximum angle range from -90° to +90°)
Preset Position: 200
Preset accuracy:±0.1°
Support Position Feedback and Absolute Position
RS485/RS422 Pan Control with Pelco P/D Protocol
Protection Grade: IP66 Waterproof
| Model | ZN-SPL04Y |
| Max. Load Capacity | 4kg(8.82lb) |
| Load Type | Top load, Side load |
| Transmission Mode | Worm Gear Transmission |
| Pan Speed | 0.01°~20°/S |
| Tilt Speed | 0.01°~10°/S |
| Pan Range | 360° continuous |
| Tilt Rang | -60° ~20° |
| Presets | 200 |
| Preset Accuracy | ±0.1° |
| Auto Cruising | Support, 2 (each with 40 presets) |
| Auto Scan | Support, 1 |
| Lens Preset Position | Optional |
| Lens Control Speed | Optional |
| Auto Homing | It can be set up within the period of 1~60 mins |
| Power on Self-test | Power on Self-test /No Self-test(Optional) |
| Position Passback | Query Response or Real-time Response Transmission |
| Auxiliary Switch | Optional(1~2 Groups) |
| Salt-Spray | Optional |
| Protocol | Pelco D (optional Pelco P/ModBus-RTU) |
| Baud Rate | 9600bps (optional 2400/4800/115200 bps) |
| Self-locking | Support |
| Interface | |
| Communication Interface | RS422 (optional RS485/RS232/Network Interface) |
| Top Cable Outlet | One pass-through standard signal cable (4-core),One DC24V power output cable (2A) |
| Bottom Cable Outlet | One pass-through standard signal cable (4-core),One DC24V power input cable (system power supply),One RS422 cable (pan-tilt communication). |
| General | |
| Power Supply | DC24V (optional DC12V) |
| Power Consumption | ≤60W |
| Static Power Consumption | ≤2W |
| Grade Protection | IP66 |
| Working Temperature | -25℃~+65℃ |
| Working Humidity | 90% RH, non-condensing |
| Storage Temperature | -40℃~+65℃ |
| Size | 184×100×175mm(L×W×H) |
| Weight | 3.6kg(7.94lb) |
| Installation Method | Fixed installation, Vehicle-mounted, Hoisting |



Q:What is the load center-of-gravity height for the 4 kg pan-tilt unit?
A:The load’s center of gravity is 20 mm directly above the top plate. Increasing the operating speed, tilt angle, or center-of-gravity height will reduce the allowable payload accordingly.
Q:What is the tilt-axis torque of the 4 kg pan-tilt unit?
A:The tilt-axis motor output torque is 3 N·m.
Q:Does the 4 kg pan-tilt unit support self-locking?
A:The pan-tilt unit uses a worm gear drive mechanism with self-locking capability on both the tilt and pan axes, allowing it to maintain its position when motion stops or power is lost.
Q:Does it support customized control or communication interfaces?
A:Yes. ZN-SPL06Y supports RS485/RS422/RS232 and ModBus-RTU protocols, making it easy to integrate with PTZ camera systems or dual-light monitoring platforms.
Q:What technical specifications should I provide before purchasing a pan-tilt unit?
A:Please provide the height of the load’s center of gravity above the pan-tilt unit’s top plate, the maximum tilt angle, and the maximum operating speeds of the pan and tilt axes so we can assess whether the unit meets your load requirements.
Contact us for pan tilt positioners, long-range surveillance cameras and custom solutions. Share your project requirements, and our team will assist with product selection, technical questions and quotations.